-40%
5
5
5
5
5

5" SINE BAR WITH 2 "SCREWLESS (PIN TYPE) TOOLMAKERS GRINDING VICE

$ 57.28

Availability: 100 in stock
  • MPN: Does Not Apply
  • Country/Region of Manufacture: India
  • Return shipping will be paid by: Buyer
  • Item must be returned within: 30 Days
  • Restocking Fee: No
  • Refund will be given as: Money Back
  • Brand: BLUEFOX
  • All returns accepted: Returns Accepted
  • Condition: New

    Description

    5" SINE BAR WITH 2"Screwless (Pin Type) Grinding Vice Hardened
    Screwless (Pin Type) Grinding Vice Hardened
    The Precision Grinding Vise is extremely useful for accurate grinding.
    Product Specifications:
    Hardened & Ground.
    Made from tool steel.
    The moving jaw of vises is slightly narrower than the base to enable the vise to be used on its sides.
    Specially designed to provide maximum holding power.
    Highly repeatable positioning due to their forward and  downward clamping action.
    Accuracy as per highest industrial standard.
    2″ PIN TYPE PRECISION GRINDING MACHINE VICE/VISE
    JAW WIDTH : 2"
    OVERALL LENGTH : 154 mm
    Overall Height : 54 mm
    Jaw Width 50 mm
    Jaw Depth 30 mm
    Max. Jaw Opening 80 mm
    SINE BAR
    DESCRIPTION
    Width : 1"
    Distance between center of rolls: 5"
    ±
    .0002"
    Used with gauge blocks is highly recommended for securing a high degree of accuracy in measuring angles for grinder and milling machine set ups
    Both sine and rolls hardened and ground for extreme accuracy
    Flange on end for resting work
    Parallelism +/- .0002 on both top & bottom
    A sine bar itself is a steel bar, made from finely ground or lapped steel, that is typically no wider than 1 inch. At each end of the sine bar is located a precision cylinder that rests against stops machined into the bottom surface. Sine bars can be designed to have upper and lower ends as well as top and bottom surfaces, allowing them to be used in either direction and on either side. In order to hold an object or part in place, there are machined holes along a sine bar into which stops or clamps may be placed. Sine blocks are identical to sine bars, but just slightly wider.
    HOW ARE SINE BARS USED IN PRACTICE?
    A sine bar and a sine plate are used identically in practice. Using gauge blocks, the sine bar or sine plate is placed at the desired angle, or an angle that matches the workpiece. When placed directly under the upper cylinder, an ABC right triangle prism is formed which then serves as the basis for your measurements. This triangle allows you to apply the sine equation from trigonometry to calculate a range of measurements. This is where sine bars and sine plates get their name